Skip to content
LaptopOwners

We may earn from links. It never picks the laptop. How we make money

Why Does My Laptop Keep Restarting by Itself? How to Find the Cause

A laptop that keeps restarting by itself is usually crashing: a stop error (the blue screen) hits, and Windows reboots before you can read it, because “Automatically restart” is switched on by default (Microsoft Learn). The next most likely causes are a Windows Update restart, heat under load, and, far less often, failing memory or a power fault.

Windows records every unexpected restart, so read that record before you change anything.

Our laptop troubleshooting guide sorts every fault by what you see when you press power; this page goes further on the one symptom where the laptop reboots on its own and comes back up.

Is it restarting, or shutting down?

This guide is for a laptop or desktop that goes dark and boots again by itself. If it switches off and stays off until you press power, the causes differ (heat cut-outs, battery, charger), so use the shutdown checks in the troubleshooting guide instead.

One ElevenForum poster’s gaming laptop restarted twice in a week with no error shown; the only clue was a Kernel-Power Event ID 41 (ElevenForum). That event is where to start.

What the timing tells you

When it restarts narrows the cause before you open a log.

When it restartsLikely causeCheck first
Overnight or while you’re away, with apps closed afterwardA Windows Update restartSettings > Windows Update > Update history
Seconds after a blue flash, or at random while workingA stop error with automatic restart onEvent 41 BugcheckCode; untick “Automatically restart”
Only under load: games, video export, many tabsHeat, or a performance mode the cooling can’t holdVents, fan test, switch to a balanced power or performance mode
Since a driver, BIOS or Windows updateA driver or firmware changeUpdate history, then the maker’s driver and BIOS updates
When you move or bump itA loose connection or battery faultStop and get it checked (see the hardware box below)
Desktop PC after adding memory, drives or a new CPUA power supply short of wattageMicrosoft’s power supply check, below
The update, stop-error and heat rows come from Microsoft and Dell pages in Sources. The “move or bump” row is our judgment, not a maker’s statement.

Fixes for a laptop that restarts on its own, quickest first

1. Rule out a Windows Update restart

Windows sometimes needs to restart to finish installing updates, and Microsoft’s answer to badly timed restarts is active hours (Microsoft). Microsoft’s guide for IT staff says automatic restarts after an update happen outside active hours, which default to 8 AM to 5 PM (Microsoft Learn). So an evening reboot can be an update.

Go to Start > Settings > Windows Update > Advanced options > Active hours, and set “Adjust active hours” to Automatically or Manually (Microsoft). To see whether an update ran on the day of a restart, open Settings > Windows Update > Update history (Microsoft). An update restart leaves no crash record behind.

2. Read Reliability Monitor

Press Windows+R, type perfmon /rel and press Enter to open Reliability Monitor (Microsoft Learn). Dell notes you can also search “reliab” and choose View reliability history (Dell). Each column is a day or week, with critical events listed first; click “View technical details” on the days it restarted. Repeated critical events from one app or driver are your best software clue.

3. Read Event ID 41’s details

Open Event Viewer, select the System log, then Action > Filter Current Log, type 41 in the Event IDs box and click OK (Microsoft Learn). Kernel-Power Event 41 says the system “has rebooted without cleanly shutting down first” (Microsoft Learn). Open the most recent one and look at its Details tab.

Event 41’s BugcheckCode and PowerButtonTimestamp tell you why a laptop restarted by itself Open Event Viewer, select the System log, choose Filter Current Log and enter 41 in Event IDs, then open the Kernel-Power 41 event and its Details tab. Event 41 means Windows rebooted without shutting down cleanly. Read two values. If BugcheckCode is not zero, a stop error (blue screen) restarted the PC: the code is in decimal, so convert it to hexadecimal (159 is 0x9F), look up its name, then update drivers and BIOS and run DISM and sfc. If PowerButtonTimestamp is not zero, someone held the power button, likely because the PC had frozen, so treat it as a freeze. If both are zero, Windows couldn’t write a code: a hard hang or lost power, so check for volmgr Event 46, heat, the charger and on a desktop the power supply. If there is no Event 41 on the day, check Update history, because it may have been a planned update restart. Restarting by itself? Event 41’s two numbers say why Event Viewer > System log > Filter Current Log > Event IDs: 41 > Details tab Kernel-Power 41: Windows rebooted without shutting down cleanly. Read two values on the Details tab: BugcheckCode PowerButtonTimestamp The code is in decimal. 159 in hex is 0x9F. BugcheckCode is not 0 A stop error (blue screen) restarted it. Convert it to hex, look up the name, then update drivers and BIOS, run DISM and sfc. PowerButtonTimestamp is not 0 Someone held the power button. Likely it had frozen, so treat this forced restart as a freeze. Both are 0 Windows couldn’t write a code. A hard hang or lost power. Check volmgr Event 46, heat, charger, desktop PSU. No Event 41 at all on that day? Check Update history: it may have been a planned update restart.
From Microsoft Learn: Event ID 41 (updated Feb 12, 2026) and Microsoft Learn: filter events; both checked Oct 28, 2026.

BugcheckCode is shown in decimal, while Microsoft’s documentation lists codes in hex. Convert it with Calculator in Programmer mode: enter the number as DEC and read the HEX line (Microsoft Learn). A few you’re likely to meet:

Decimal in Event 41HexNameWhere it points
1590x9FDRIVER_POWER_STATE_FAILUREA driver in an inconsistent or invalid power state (Microsoft Learn)
2920x124WHEA_UNCORRECTABLE_ERRORHardware: Microsoft says it can be heat related, or failing memory or CPU (Microsoft Learn)
260x1AMEMORY_MANAGEMENTA memory management error; Microsoft suggests Windows Memory Diagnostic (Microsoft Learn)
Names and descriptions from Microsoft’s bug check reference, checked Oct 28, 2026. The decimal values are our own conversions of Microsoft’s hex codes.

If both values are zero, Microsoft also says to look for a volmgr Event 46 saying crash dump initialization failed. If it’s there, a crash may still have caused the restart, but Windows couldn’t record it, so check the pagefile settings (Microsoft Learn).

4. Turn off automatic restart

Dell lists this among its fixes for random reboots (Dell). Press Windows+R, type sysdm.cpl and press Enter. On the Advanced tab, under Startup and Recovery, click Settings, untick “Automatically restart” under System failure and click OK. Dell says it can help prevent reboot loops. Our reading, not Dell’s: with it off, the next stop screen should stay up long enough to photograph the stop code. It doesn’t fix anything; it gets you the name.

5. Update drivers and BIOS, then repair Windows files

Microsoft’s stop-error checklist includes the latest Windows updates, an up-to-date BIOS and firmware, and 10 to 15 percent free disk space (Microsoft Learn). Use your laptop maker’s support site or app.

Then open Command Prompt as administrator (type cmd in Search, right-click Command Prompt, Run as administrator) and run these one at a time. DISM first, because it fetches the files that SFC uses for repairs (Microsoft):

DISM.exe /Online /Cleanup-image /Restorehealth
sfc /scannow

If SFC reports it “could not perform the requested operation”, Microsoft says to run it again in Safe Mode. If it found corrupt files but couldn’t fix some, the details are in the CBS.log file.

If the restarts began right after an update, uninstall it: Settings > Windows Update > Update history > Uninstall updates (Microsoft). If the laptop now can’t get past startup at all, our guide to the Automatic Repair loop picks up from there.

6. Try with Fast Startup off

Dell lists turning off Fast Startup for random restarts: Control Panel > Hardware and Sound > Power Options > Choose what the power buttons do > Change settings that are currently unavailable, then untick “Turn on fast startup (recommended)” and save (Dell). With it on, Shut down hibernates the Windows kernel rather than closing it, saving the kernel session and device drivers to disk (Microsoft Learn). Microsoft says disabling it isn’t recommended, so turn it back on if the restarts continue.

7. Check heat and performance mode

When restarts only happen under load, heat is the first hardware suspect. Dell lists rebooting randomly among overheating symptoms, and its fixes are to clean the vents, run the fan test and set a cooler thermal profile (Dell). Microsoft’s 0x124 page also says to confirm the fans work and to turn off any overclocking (Microsoft Learn).

In one HP Community thread, an Omen 16 owner reported restarts a few minutes into games, with normal temperatures and only Kernel-Power 41 in the log; another user replied that switching Omen Gaming Hub’s performance mode to Balanced stopped it (HP Community). That’s one user’s fix, not HP’s. In another thread, about an HP laptop that began rebooting after an update that included a BIOS update, an HP employee suggested Fast Startup off and power plan defaults (HP Community).

8. Run the hardware tests

Back up first. On a Dell, press F12 repeatedly at the Dell logo, choose Diagnostics, and note the error code, validation code and Service Tag if anything fails (Dell). Other makers have their own test in the boot menu or support app. For a 0x1A code, Microsoft suggests the Windows Memory Diagnostic tool (Microsoft Learn).

On a Mac or Chromebook

A Mac that restarts unexpectedly has had a kernel panic, and Apple says “the most likely cause is faulty software” (Apple). Apple’s order: safe mode and updates, remove third-party add-ons, disconnect accessories, then Apple Diagnostics. On Apple silicon, hold the power button until Options appears, release it, then hold Command-D (Apple).

On a Chromebook, open Settings > About ChromeOS > Diagnostics and run the CPU and memory tests (Google).

Desktop PC: check the power supply

For restarts where Event 41 shows all zeros, Microsoft’s Event 41 page says to check that the power supply has enough wattage, especially after you’ve added memory, a newer processor, more drives or external devices. If the power was interrupted, it suggests a UPS (battery backup) (Microsoft Learn).

FAQ

Why is my laptop restarting on its own again and again?

Usually a stop error with automatic restart on, so the blue screen flashes past. Check Event 41’s BugcheckCode. If there’s no crash that day, it was probably a Windows Update restart.

How do I stop my laptop from auto restarting?

For update restarts, set active hours in Settings > Windows Update > Advanced options. For crash restarts, untick Automatically restart under System failure in Startup and Recovery settings. That only stops the reboot; the crash still needs fixing.

What does Kernel-Power 41 mean?

Windows restarted without shutting down cleanly. A nonzero BugcheckCode points to a stop error, a nonzero PowerButtonTimestamp means the power button was held, and all zeros mean a hard hang or lost power.

Can overheating make a laptop restart?

Yes. Dell lists random reboots among overheating symptoms, and Microsoft says the 0x124 hardware error can be heat related. Restarts that only happen under load are the giveaway.

What to do next

  1. Note when it restarts and match it to the timing table.
  2. Check Update history, then open Reliability Monitor with perfmon /rel.
  3. Read Event 41’s BugcheckCode and convert it to hex.
  4. Untick Automatically restart, then update drivers and BIOS and run DISM and sfc.
  5. If restarts come under load or a hardware code repeats, run the maker’s diagnostics and price the repair with our calculator.

If your laptop locks up and needs the power button rather than rebooting by itself, read why a laptop keeps freezing.

Sources

More guides guides