Skip to content
LaptopOwners

We may earn from links. It never picks the laptop. How we make money

Laptop Screen Black but You Can See the Mouse? How to Fix It

If your laptop screen is black but you can see the mouse, Windows has started and the screen works, but the desktop didn’t load. The usual cause is Windows Explorer, the program that draws the desktop and taskbar, hanging or failing to start, often after an update, a new driver or a startup app. Microsoft says a blank screen with a cursor is often caused by a stalled Windows process or a driver issue.

The cursor is good news: it means the screen is working, so this is usually a software fix. Our laptop troubleshooting hub covers every kind of black screen in one paragraph each; this guide takes the cursor case step by step, quickest first.

Cursor or no cursor? Check before you start

Move the touchpad. If an arrow moves on the black screen, you’re in the right guide. Microsoft separates this from a blinking text cursor at the top left, which means the firmware can’t find a boot device (Microsoft), and from a screen with no picture at all.

What you seeWhat it usually meansGo to
Black screen, arrow moves, after you sign inExplorer didn’t start or hung; a driver, update or startup appSteps 1–5 below
Black screen, arrow moves, after waking from sleepExplorer or the graphics driver didn’t resumeSteps 1–3, then step 5
Black screen with a blinking dash, top left, no arrowStartup can’t find Windows (boot loader stage)No bootable device guide
Logo, then black, nothing movesStartup stalled before sign-inStuck on the logo guide
Lights on, no picture, no arrow, no backlightDisplay, graphics or boardLaptop won’t turn on guide
Symptoms from Microsoft: blank screens and Microsoft Learn: boot troubleshooting; checked Oct 28, 2026.
A black screen with a moving cursor is fixed from the keyboard first: three shortcuts, then a forced restart, then Safe Mode Fix flow in five steps. 1: press Windows+Ctrl+Shift+B to reset the graphics driver; a beep or flicker means it ran. 2: press Windows+P, then P, then Enter to cycle display modes. 3, highlighted: press Ctrl+Shift+Esc and restart Windows Explorer; if it isn’t listed, choose File, Run new task, type explorer.exe and press Enter. 4: hold power for 20 seconds and start again; unsaved work is lost. 5: Safe Mode with Networking (F5) from the recovery menu, then roll back the display driver, uninstall the update or use System Restore. Note: if the laptop screen is black but an external monitor works, the laptop screen or its cable is the problem, not Windows. A moving cursor means Windows runs; fix the desktop, quickest first Try a normal sign-in after each step. Steps 1 to 3 need only the keyboard. 1 Win+Ctrl+Shift+B Resets the graphics driver. A beep or flicker means it ran. 2 Win+P, then P, then Enter Cycles display modes in case Windows is sending the picture elsewhere. 3 Ctrl+Shift+Esc: restart Windows Explorer Not listed? File > Run new task, type explorer.exe, Enter. 4 Hold power 20 s, then start again Forces a full restart. Unsaved work is lost. 5 Safe Mode (F5) from the recovery menu Roll back the display driver, uninstall the update or restore. Black on the laptop but fine on an external monitor? Then it’s the screen or its cable, not Windows.
Steps from Microsoft: Troubleshooting blank screens in Windows (updated Sep 28, 2026); external-monitor reading from HP Tech Takes. Both checked Oct 28, 2026.

The fixes, quickest first

1. Reset the graphics driver: Windows+Ctrl+Shift+B

Press all four keys together. Microsoft says a beep or a flicker means it worked (Microsoft). It’s also the first step in Microsoft’s IT-pro guide to a black screen after sign-in (Microsoft Learn).

2. Cycle the display mode: Windows+P

Press Windows+P, press P again, then Enter. This steps through PC screen only, Duplicate and Extend (Microsoft). It helps when Windows is sending the desktop to a projector or TV that isn’t there.

3. Restart Windows Explorer from Task Manager

Press Ctrl+Shift+Esc to open Task Manager, find Windows Explorer, right-click it and choose Restart (Microsoft). If Ctrl+Shift+Esc does nothing, press Ctrl+Alt+Del and choose Task Manager from that screen.

If Windows Explorer isn’t in the list, it never started. Choose File > Run new task, type the command below and press Enter:

explorer.exe

If the desktop comes back, you’re working again, but the cause is still there. Microsoft’s guide for IT staff says Explorer may stop responding or exit, or a startup app or service may be to blame, which is what the clean boot in step 6 tests (Microsoft Learn).

4. Force a full restart

Hold the power button for 20 seconds (Microsoft). Anything unsaved is lost. Unplug docks and external displays before you turn it back on; Microsoft lists disconnecting external displays and peripherals on a laptop as a hardware check (Microsoft).

5. Safe Mode, then roll back the driver or the update

If it’s still black, open the recovery menu. Microsoft’s blank-screen page says to hold power for 10 seconds to force it off and repeat 2–3 times until Windows enters recovery (Microsoft). If you can reach a Power button, holding Shift while you select Power > Restart also opens it (Microsoft).

Then go to Troubleshoot > Advanced options > Startup Settings > Restart, and press F5 for Safe Mode with Networking (Microsoft). On a BitLocker-encrypted drive, you’ll need the recovery key for this (Microsoft). In Safe Mode:

  • Roll back the display driver. Open Device Manager, expand Display adapters, right-click your adapter, then Properties > Driver > Roll Back Driver. If the button is greyed out, Microsoft says to reinstall the driver instead (Microsoft).
  • Uninstall the update. If the black screen began after an update, the recovery menu’s Troubleshoot > Advanced options > Uninstall Updates > “Uninstall latest quality update” removes it (Microsoft).
  • System Restore. From the recovery menu, Troubleshoot > Advanced options > System Restore, and pick a point from before the problem (Microsoft). Microsoft says it works “without affecting your personal files” (Microsoft).

6. Find the app behind it with a clean boot

If the black screen keeps coming back, a startup app or service is a likely culprit (Microsoft Learn). Microsoft’s clean boot, as an administrator: search for msconfig and open System Configuration; on the Services tab, tick the box to hide Microsoft services and click Disable all, then Apply; on the Startup tab, open Task Manager and disable each startup app; restart (Microsoft). Write down what you disabled. If the desktop loads, turn things back on a few at a time until the black screen returns.

Reverse it afterward: on System Configuration’s General tab choose Normal Startup; on the Services tab clear Hide all Microsoft services, choose Enable all, then Apply; and re-enable the startup apps you disabled in Task Manager (Microsoft).

What fixed it for other owners

On Microsoft Q&A, a Lenovo Yoga 6 owner signed in to a black screen with a working cursor, possibly after an update; restarting Explorer did nothing. Rolling back from the recovery options to a point from the day before the update brought the desktop back. In the same thread, a desktop owner (ASUS ROG Strix board) found the cause by uninstalling recent programs one at a time: the fourteenth, a folder-locking app, was it (Microsoft Q&A).

Another owner gets a black screen with a cursor after waking from sleep on Windows 11 25H2. Launching explorer.exe from Task Manager brings it back each time, but no lasting fix is recorded (Microsoft Q&A). And on ElevenForum, an owner whose trouble began after deleting the $Windows.~BT folder (a failed update’s leftovers) ran Startup Repair, System Restore and sfc /scannow without success (ElevenForum). Don’t delete Windows folders by hand to free space.

The test most forum threads skip: an external monitor

Plug in a TV or monitor and press Windows+P. HP’s reading: if the external display works, your laptop screen or display cable has failed (HP Tech Takes). If the desktop shows there but not on the laptop, the fixes above won’t help.

On a Mac

Apple treats a blank screen at startup as one problem. Its order: hold the power button (or Touch ID) for up to 10 seconds until the Mac turns off, then turn it back on; if it stays blank, start from macOS Recovery and repair the startup disk in Disk Utility; if that fails, reinstall macOS from Recovery. If Recovery won’t start either, Apple says to revive or restore the firmware, or check the external display if you use one (Apple).

FAQ

Why is my laptop screen black but I can see the mouse?

Windows has started but the desktop hasn’t. Microsoft says it’s often a stalled Windows process or a driver issue (Microsoft). Restarting Windows Explorer from Task Manager (Ctrl+Shift+Esc) brings the desktop back in many cases.

What does Windows+Ctrl+Shift+B do?

It resets the graphics driver. Microsoft says you’ll hear a beep or see a flicker when it works (Microsoft).

Will I lose my files fixing this?

Steps 1 to 4 don’t touch files beyond unsaved work. System Restore keeps personal files but can roll back installed programs (Microsoft). Only Reset this PC with Remove everything erases them.

Is a black screen with a cursor a virus?

It can be, but the usual causes are an update, a driver or a startup app. Once the desktop is back, run a scan in Windows Security as well as the clean boot above. One owner’s cause was a folder-locking app (Microsoft Q&A).

What to do next

  1. Press Windows+Ctrl+Shift+B, then Windows+P.
  2. Open Task Manager with Ctrl+Shift+Esc and restart Windows Explorer, or run explorer.exe as a new task.
  3. Still black: hold power 20 seconds, then go to Safe Mode and roll back the display driver or the last update.
  4. If it keeps coming back, do a clean boot to find the startup app behind it.
  5. Test an external monitor; if only the laptop screen is black, it’s hardware. If it freezes instead, see why a laptop keeps freezing.

Sources

More guides guides