Skip to content
LaptopOwners

We may earn from links. It never picks the laptop. How we make money

How to Check Laptop Battery Health on Windows 11 and Mac

To check laptop battery health on Windows 11, run powercfg /batteryreport and compare Full Charge Capacity with Design Capacity. On a Mac, open System Settings > Battery and look at Battery Health. Both take under two minutes, and both tell you how much charge the battery holds now compared with new.

The number alone doesn’t say “replace it”, so this guide also covers what each maker counts as worn. If you’d rather not read the report yourself, upload it to our laptop battery health check and it does the math. The laptop battery guide covers charging habits and replacement; this page is the check itself, step by step.

Windows 11: run the battery report

This works on any Windows 11 laptop, whatever the brand. It’s the quickest check.

  1. Select Start, type Command prompt, right-click it and choose Run as administrator, then Yes. That’s how Microsoft’s battery-care page does it; Microsoft’s powercfg reference doesn’t say admin is required, and Dell’s steps use a normal prompt (Microsoft, Microsoft Learn, Dell).
  2. Type powercfg /batteryreport and press Enter (the command is below to copy).
  3. The prompt prints where it saved the file. Microsoft says the report goes “in the current path”; from a normal prompt Dell finds it in C:\Users\Your_Username\ as battery-report.html (Microsoft Learn, Dell).
  4. Open the file in File Explorer. It opens in your web browser.
powercfg /batteryreport

To choose the file name, Microsoft’s example is powercfg /batteryreport /output "batteryreport.html". Add /duration 4 to limit the history to the last four days (Microsoft Learn).

Read the three lines that matter

In a battery report, divide Full Charge Capacity by Design Capacity to get battery health Illustrative mock-up of the Installed batteries table in a Windows battery report, with made-up numbers. Rows: name, manufacturer, chemistry, design capacity 54,000 mWh, full charge capacity 41,580 mWh, highlighted, and cycle count 412. Design capacity is what it held when new. Full charge capacity is what it holds now; divide it by design capacity, here 41,580 divided by 54,000 equals 77 percent. Cycle count is the charge cycles so far, if the laptop reports them. Also worth reading, per Dell: Recent usage for periods of high drain or apps that blocked sleep, and Battery life estimates. Microsoft’s powercfg page doesn’t define these labels; they are the report’s own. Two numbers in the battery report tell you how worn it is Illustrative example with made-up numbers, laid out like the report’s “Installed batteries” table Installed batteries NAME (model of the battery) MANUFACTURER (maker) CHEMISTRY (for example LiP) DESIGN CAPACITY 54,000 mWh FULL CHARGE CAPACITY 41,580 mWh CYCLE COUNT 412 What it held when new Now: 41,580 / 54,000 = 77% Cycles so far, if reported Also worth reading: Recent usage (high drain, apps that blocked sleep) and Battery life estimates (Dell). Microsoft’s powercfg page doesn’t define these labels; they are the report’s own.
Illustrative layout with made-up numbers, not a real laptop. Labels from the report itself and Dell KB 000130117; Microsoft Learn describes the command; checked Oct 29, 2026.

Under Installed batteries, compare Design Capacity (what it held new) with Full Charge Capacity (what it holds now). Divide the second by the first and you have the health percentage. Cycle Count sits in the same table on laptops that report it. These are the report’s own labels; Microsoft’s powercfg page doesn’t define them.

Two more sections are worth a look. Dell says to read Recent usage for “periods of unexpectedly high drain” or apps that kept the laptop awake, and Battery life estimates to compare against what you actually get (Dell). Battery capacity history shows the trend, which Dell calls “a primary way” to decide whether a battery must be replaced.

Don’t panic if a new battery reads a little under 100%. Dell says Full Charge Capacity moves with temperature, heat soak, deep discharges and cycles, and that the gap to Design Capacity can lead people to “falsely assume” a fault (Dell). Watch the trend over a few months rather than one reading.

Use your laptop maker’s battery test

The maker’s tool reads the same battery but gives a verdict, and HP’s gives the failure ID its support team uses to set up a repair. Run it if the report looks bad, or if you’d rather have a pass or fail.

BrandWhere to find itWhat it tells you
HPHP Battery Check, from HP Support Assistant (HP’s support page has a Start diagnostic tool button)A failure ID if it finds a problem; HP uses it to set up a repair, free under warranty
DellF12 at startup > Diagnostics > Advanced Test > System Info > Health tab; or F2 BIOS > Battery Health; or Dell Power Manager > Battery Information; or Dell Optimizer > Power > About my batteryExcellent, Good, Fair, Poor or Unknown
LenovoLenovo Vantage > Device > My Device Settings > BatteryCharge settings such as Conservation mode; the Lenovo page opened gives no health test or threshold
ASUSMyASUS System Diagnosis > Battery problems (check item: Battery)Error items and suggestions after you click Result; check items vary by model
ChromebookSettings > About ChromeOS > Diagnostics, or search the launcher for DiagnosticsHealth, cycle count and current, plus a discharge test
Maker battery tests. Sources: HP, Dell, Lenovo, ASUS, Google; all checked Oct 29, 2026.

Dell’s labels are worth knowing because they’re plain. Good means it charges normally but you “might notice it doesn’t last as long”; Fair means it’s “nearing the end of its usable life”; Poor means it “no longer provides sufficient power” and replacement is recommended (Dell). On Latitude business laptops, Dell maps these to percentages: Excellent is 65% health or more, Good is between 50% and 65%, Fair is above 25% up to 50%, and Poor is 25% or less (Dell). That mapping is for Latitudes only.

Mac: check Battery Health and cycle count

  1. Choose Apple menu > System Settings, then click Battery in the sidebar (Apple).
  2. Find Battery Health. Click the Info button next to it to see Battery Condition and Maximum Capacity, “your battery’s capacity relative to when it was new”, depending on your Mac model (Apple).
  3. For the cycle count, hold Option, click the Apple menu and choose System Information. Under Hardware, select Power; the count is under Battery Information (Apple).

Battery Condition reads Normal (“functioning normally”) or Service Recommended, which Apple says means the battery holds less charge than new or isn’t working normally. Apple adds that you can “safely continue to use your Mac” (Apple). On older macOS without Battery Health, Option-click the battery status menu instead; it may show Replace Soon, Replace Now or Service Battery (Apple).

Compare the cycle count with your Mac’s rating: 1,000 for recent MacBook Air and Pro models, 500 or 300 for some older ones. Apple designs the battery to keep up to 80% of its original capacity at that count (Apple).

Chromebook: run Diagnostics

Select the time at the bottom right, then Settings > About ChromeOS > Diagnostics. The Battery section shows health, cycle count and current. The discharge test measures how fast it charges and discharges over a fixed period; Google says a very low rate can point to the battery or the charging port. Diagnostics needs ChromeOS 90 or later (Google).

Is 80% battery health good? What each maker says

80% is worn but working. None of the maker pages we opened treats it as failed, and Apple uses it as the line for its own rating and its warranty plan. Here’s what each one says, so you can read your own number.

Your resultWhat the maker saysWhat to do
Mac at or near its rated cycle count (1,000 on recent models)Designed to keep up to 80% of original capacity at that count (Apple)Normal wear; plan a replacement when the hours stop covering your day
Mac under 80% with AppleCareApple replaces it at no chargeBook it while you’re covered
Mac shows Service RecommendedHolds less charge than new, but you can safely keep using it (Apple)Replace when runtime bothers you
Windows report under 40% of design capacity“Should be replaced” (Dell)Replace
Dell status Fair or Poor, or runtime under 50% of newSigns to consider a new battery (Dell)Get a quote
HP Battery Check failure IDHP uses it to arrange a repairContact HP with the ID
Any brand, 70%–79%No maker threshold; our tool calls it WornFine for a desk; check it covers your longest day
Battery health thresholds. Sources: Apple cycle count, Apple Service Recommended, Dell KB 000130117, Dell KB 000175212, HP; all checked Oct 29, 2026. The 70%–79% row uses our battery health check bands, which are our own.
Swelling, a failed maker test or under 40% of design capacity means replace the battery Decision list for a battery health result, worked from the top. One, highlighted: is the base bulging, the trackpad raised, or does the laptop no longer sit flat? Stop using and charging it now and contact the maker, as Dell advises. Two: does HP Battery Check give a failure ID, or does Dell show Poor or Unknown? Schedule a repair with the maker; HP repairs it free under warranty. Three: does the Mac say Service Recommended? Apple says it’s safe to use; our own suggestion is to replace it when the hours stop covering your day. Four: in the Windows report, is full charge capacity under 40 percent of design capacity? Dell says it should be replaced. Five, our own rule of thumb: if the battery no longer gets you through your day, it’s worth replacing whatever the percentage says. If none is true, our read is that it’s normal wear; turn on your brand’s charge limit if it’s plugged in most days. Got your number? Work down until one is true The first yes tells you what to do. Maker rules are labeled; “ours” and “our view” mark our rule of thumb. Base bulging, trackpad raised, or laptop no longer sits flat? Stop using and charging it now. Contact the maker (Dell). No HP Battery Check gives a failure ID, or Dell shows Poor or Unknown? Schedule a repair with the maker; HP: free if under warranty. No Mac says Service Recommended? Safe to use (Apple). Ours: replace when the hours stop covering your day. No Windows report: full charge under 40% of design capacity? Dell says it “should be replaced”. No Battery no longer gets you through your day? Our view: worth replacing, whatever the percentage says. None true? Our read: normal wear. Turn on your brand’s charge limit if it’s plugged in most days.
Sources: Dell KB 000143524 (swelling), HP, Dell, Apple, Dell KB 000130117; all checked Oct 29, 2026. Rows marked “ours” or “our view”, and the footer, are our own rule of thumb.

Is 72% battery health good?

It’s worn, not failing. On Apple’s scale it’s below the 80% the battery is designed to hold at its rated cycle count. On Dell’s Latitude battery meter it would still read Excellent, because Dell puts that line at 65% (Dell). Dell’s general replace line is 40% (Dell). As a rough guide (ours, not a maker’s), 72% means about seven-tenths of the hours it gave when new, so whether it’s “good” depends on your longest day away from a charger.

Wear can also be faster than people expect. In a 2025 Tom’s Guide thread, an HP 14 owner reported a replacement battery, installed at an HP service center, dropping from 41,040 mWh to 31,692 mWh within a few months; the forum moderator said degradation is normal, called it typical under heavy load such as gaming, and asked whether it was an aftermarket or HP battery (Tom’s Guide forum). If a new battery drops that fast, ask the shop or maker about it while it’s under warranty.

FAQ

How do I check my laptop battery health in Windows 11?

Open Command Prompt, run powercfg /batteryreport, open the HTML file it saves, and divide Full Charge Capacity by Design Capacity (Microsoft Learn, Dell).

How do I check MacBook battery health?

Apple menu > System Settings > Battery, then the Info button next to Battery Health for Maximum Capacity. Cycle count is in System Information > Power (Apple, Apple).

Is 80% battery health good on a laptop?

It’s normal wear. Apple designs its batteries to keep up to 80% at the rated cycle count, and AppleCare replaces them below 80% (Apple, Apple). Replace it when it no longer lasts your day.

Why doesn't my battery report show a cycle count?

The pages we opened don’t explain when it’s missing, and Dell’s guide to the report doesn’t use it. Dell goes by Full Charge Capacity against Design Capacity and the capacity history (Dell). For a cycle figure, try the maker’s app.

What battery health percentage means replace it?

Dell says under 40% of design capacity (Dell). AppleCare replaces a Mac battery below 80%, and HP goes by its Battery Check result (Apple, HP). Swelling means replace it now, whatever the number.

What to do next

  1. Run powercfg /batteryreport (or open Battery settings on a Mac) and note the health percentage and cycle count.
  2. Upload the report to our battery health check for a verdict.
  3. If it’s worn but fine, turn on your brand’s charge limit so it wears more slowly from here; every brand’s setting is in our plugged-in guide.
  4. If it drains fast but the health looks fine, the cause is probably software: see why a laptop battery drains fast.
  5. If it needs replacing, compare the quote in the repair or replace calculator, or shortlist a new laptop with the laptop finder.

Sources

More guides guides